Peplink Router Login

Peplink Router Login, Access Settings & Change Wi-Fi Password Easily with the help of http://192.168.1.1 or http://192.168.50.1

192.168.50.1

192.168.1.1

How to Login to Peplink Router?

1.Connect to the Peplink Network

  • Make sure your computer, tablet, or smartphone is connected to the Peplink router via Wi-Fi or Ethernet.

2. Open a Web Browser

  • Open any modern web browser, such an as Chrome, Firefox, Safari, or Edge.

3. Enter the Router IP Address

  • Enter the default IP address in the address bar: http://192.168.1.1 or http://192.168.50.1 (If those don’t work, look in Network settings or on your router’s label.)

4. Login with Admin Credentials

  • You’ll need to type in a username and password. Usually the default credentials are:

  • Username: admin

  • Password: admin or password (Note: For security reasons you should change these if you have not already.)

5. Log In to the Web Admin Interface

  • Once you are successfully logged in, you will be taken to the Peplink Web Admin dashboard where you can configure all the settings for your router.

Peplink Router Login

How to Change Peplink Wi-Fi Password and Network Name?

1.Login to the Web Admin Interface

  • Login to your Router’s control panel (refer to the login instructions above).

2. Go to the Wi-Fi Settings

  • Download And just to do the basic configuration, the next step is to go to the dashboard and then Network > Wi-Fi AP > Settings (or equivalent according to the firmware version).

3. Edit Your SSID (Network Name)

  • Below SSID Settings, you should see a list of saved Wi-Fi networks. Select the one you want to modify, and then click Edit.

  • Edit the SSID with your new network name.

4. Change the Wi-Fi Password

  • Scroll down to the Security Settings group.
  • Select the type of encryption (usually a WPA2 or WPA3)
  • Type a very strong password in the Pre-Shared Key box.

5. Save and Apply Changes

  • Hit Save, and then click Apply Changes to make the network apply the changes. Your devices will be disconnected and should reconnect using the new credentials.

How to Secure Your Peplink Router

  • Use Strong Passwords: Use passwords that are combination of letters, numbers and symbols and also be longer than 8 characters.
  • Only Allow HTTPS Access: For remote administration, ensure secure protocols are exposed.
  • Update your Firmware Frequently: Always make sure your Peplink firmware is up-to-date through InControl 2 or your device’s web admin.
  • Most recent models will make you change this password the first time you log in.] Update Default Admin Password: As an added security measure, change the default “admin/admin” login username and password in System > Administration.

Troubleshooting Common Issues

Can’t Access the Login Page?

  • Make sure you are on the right network.
  • Try another browser or clear cookies/cache.
  • See if the default IP has been changed.

Forgot Your Password?

  • Do a factory reset by pressing reset button for 10 second.
  • After reseting to factory defaults, use the EZ Setup Wizard to reconfigure your Edimax device.

Logging into your Peplink router and customizing your Wi-Fi settings is a straightforward process once you know where to look. Whether you’re securing your network, troubleshooting connectivity issues, or setting up a guest network, accessing the admin panel gives you full control over your internet experience.